|
ASTM Standard
|
Title
|
Description
|
Final Result
|
|
ASTM
C-1452
|
Standard Specification
for Reinforced Autoclaved Aerated Concrete (AAC) Elements |
Standard Covers
Loadbearing and Non-loadbearing Reinforced AAC Floor,
Roof, Wall and Stair Elements |
Compression Strength, Density, Reinforcing
Specifications, Testing Requirements
|
|
ASTM
C-1386
|
Standard Specification AAC
Units |
Standard Covers Loadbearing
and Non-loadbearing AAC Units |
Compressive Strength of AAC 580-725
psiDry Density 31-50 pcf
|
|
ASTM
E-119
|
Fire Test of Building Constructions
and Materials |
Fire Test of Wall Assemblies
(Load/Non-loadbearing) and Hose Stream Test. Fire Test
of Floor/Roof Assembly |
UL Classification Fire Ratings for
Blocks, Lintels, Wall/Floor/Roof Panels Containedin
UL Fire Resistance Directory
|
|
ASTM
E-90
|
Sound Transmission Loss Test |
Airborne Sound Transmission
Test on Wall/Roof Assemblies |
STC Ratings of AAC AssembliesUL Certification
|
|
ASTM
E-492
|
Impact Sound Transmission
Test |
Impact Sound Transmission
Test on Wall/Roof Assemblies |
IST Ratings AAC Roof/Floor AssembliesUL
Certification
|
|
ASTM
E-72
|
Compression and Transverse
Load Testing of Panels |
Testing Wall/Floor/Roof Panels
for Compression/Transverse Loads |
Load Table Ratings of Wall/Floor/Roof
Panels
|
|
ASTM
C-469
|
Modulus of Elasticity |
Compression Testing Expressed
Exponentially |
Stress Strain Curve of AAC in Compression
|
|
ASTM
E-78
|
Flexural Strength |
Flexural Test of AAC Units |
Flexural Strength of AAC Products
|
|
ASTM
E-518
|
Flexural Bond Strength of
Masonry |
Assembly of Masonry Units
Constructed as Beams |
Flexural Bond Strength of AAC Products
|
|
ASTM
E-519
|
Diagonal Tension Test of Masonry
Assemblies |
Full Scale Walls |
Diagonal Tension of AAC
|
|
ASTM
E-447
|
Compressive Strength Testsof
Masonry Prisms |
Masonry Units Assembled in
Stack Bond for Compression Testing |
Compressive Strength of AAC
|
|
ASTM
C-177-85
|
Standard Test Method for Steady-State
Heat Flux Measurements and Thermal Transmission Properties
by Means of the Guarded Hot Plate Apparatus |
A Portion of AAC Material
of 12” x 12”and 1” thick is Placed in the Guarded Hot
Plate. It is Subjected to a Heat Source and Temperature
Measurements are Made Until A Steady State is Reached. |
Experimental Value of Thermal Conductivity
(K)
|
|
ASTM
E-514
|
Test for Water Penetration
and Leakage Through Masonry |
Full Scale Wall Assemblies
Subjected to Water Under Pressure Exposure |
Zero Water Penetration or Leakage
Through AACMasonry Assembly After 8 Hrs @ 62.5 mph
|
